Complete connecting rod suitable for crankshafts of various mopeds, mopeds and small motorcycles with Sachs engines.
The replacement connecting rod comes with two connecting rod bolts of different lengths, which are used depending on the crankshaft. The connecting rod requires a 14 mm piston pin.
- Dimension connecting rod pin 1: Ø14 x 30.2 mm
- Dimension connecting rod pin 2: Ø 14 x 34.4 mm
- Connecting rod length (center - center): 85 mm
- Total connecting rod length: 107.4 mm
- Thickness: 10 mm
- Outer diameter of the lower connecting rod eye: 24.75 mm
- Outer diameter of the upper connecting rod eye: 20.85 mm
- Lower needle roller bearing (silver ball): Ø18/14 x 9.75 mm
- Upper needle bearing: Ø15/12 x 12.7 mm
- Ø für piston pin: 12 mm
The two brass spacers are included.
Branded product from the Portuguese manufacturer Jasil under the Top Racing brand.
| Manufacturer | Jasil |
| Material | Steel |
| Surface | copper-coated |
| Thickness | 10 mm |
| Connecting rod length center-center | 85 mm |
| Ø Connecting rod bolt | 14 mm |
| Ø lower connecting rod eye outside | 24.75 mm |
| Ø upper connecting rod eye outside | 20.85 mm |
| Ø piston pin (B) | 12 mm |
| Ø lower bearing inside | 18 mm |
| Ø inside upper bearing | 15 mm |
| Dimension lower bearing | 14/18 x 9.75 mm |
| Total length | 107.4 mm |
| Dimension upper bearing | 12/15 x 12.7 mm |
| Area of application | Standard, Tuning |
| Connecting rod pin length | 30.2 mm, 34.4 mm |
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
Ratings
Moped fans also bought
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø outside: 33 mm · Place of use: Crankshaft · Ø inside: 17 mm
EUR 10.90
NSK 6201 ball bearing 12/32/10
Bearing type: Shoulder bearing · Stock number: 6201 · Ø inside: 12 mm · Ø outside: 32 mm · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Area of application: Standard · Width: 10 mm
EUR 10.40
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Manufacturer: Sachs · Material: NBR · Surface: coated · Place of use: Pinion shaft · Width: 3.5 mm · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Area of application: Standard · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 9.20
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø outside: 30 mm · Ø inside: 15 mm · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
EUR 6.60
swiing® revival gasket set | Sachs 503 ADV wide wall Cat.
Manufacturer: swiing® revival parts · Material: Copper · Material: Fiber · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Number of components: 15 pcs · Hole spacing inlet: 38 mm · Ø outlet inside: 23.3 mm · Hole pattern [mm]: 56 x 56 · Area of application: Standard · Decompressor: No
EUR 55.00
Not in stock
Collection only possible with online purchase and appointment.
