
Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the coil springs can be adjusted using the special spring mount.
Length (mount - mount): 280 mm
Ø outer spiral spring: 45 mm
Ø spars: 28 mm
Büchsendurchmesser zur Bef.: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Quality product from the Italian manufacturer IMCA.
| Manufacturer | IMCA |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Mounting type | Nuts & bolts |
| Ø outside | 45 mm |
| Ø spars | 28 mm |
| Hole spacing | 280 mm |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm |
| Total length | 310 mm |
| Universal |
| Tomos |
Accessories & related products
IMCA Shock absorber 28 cm chrome
Manufacturer: IMCA · Color: Chrome · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø outside: 45 mm · Mounting type: Nuts & bolts · Ø spars: 28 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 280 mm · Total length: 305 mm
EUR 62.40
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.90
EUR 2’690.00/l
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Number of components: 17 pcs · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon
EUR 21.90
YSS Shock absorber Racing 28 cm (oil pressure)
Manufacturer: YSS · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Color: black · Mounting type: Nuts & bolts · Ø spars: 280 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 280 mm · Total length: 310 mm
EUR 171.50
Explore categories from Shock absorber & swingarm
Moped fans also bought
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Consistency: UV-resistant · Consistency: petrol resistant · Rear side texture: Adhesive
EUR 11.50
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Thread length: 4 mm
EUR 2.45
swiing® revival side protection screw set black | Puch Maxi S
Drive: Slot · Drive: Triangular head · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Total length: 47 mm · Thread length: 50 mm · Total length: 60 mm
EUR 15.80







