For the economical repair of damaged or worn threads (of all materials) and as a design element for thread reinforcement when using materials with low shear strength (e.g. aluminum, aluminum-magnesium alloys). The use of wear-free HeliCoil thread inserts not only repairs the thread but also increases the thread load-bearing capacity.
Execution:
High-strength, free-running HeliCoil®plus thread inserts made of stainless steel with high wear resistance, low thread friction in tight tolerances, high surface quality as well as corrosion resistance and heat resistance. The flexible design enables even load and stress distribution and thus produces durable screw connections of the highest quality for all operating loads (static, dynamic) with ideal force transmission. Uncomplicated, quick assembly, creating an internal thread that is true to gauge and can be used on both sides.
Complete repair kit for M8x1 thread sizes in a plastic case.
Application:
1. Drill out the defective thread with the enclosed drill.
2. Check the tap and threaded bolt.
3. Cut the holding thread with the special HeliCoil tap.
4. Turn the thread insert into the holding thread using the installation tool.
5. Remove the tang with the tang breaker
Scope of delivery
- 1 pc. twist drill Ø8.3 mm
- 1 pc. Thread cutter
- 1 pc. Installation tool
- 1 pc. Stud breaker
- 10 pcs. HeliCoil thread insert (1×D)
- 10 pcs. HeliCoil threaded insert (1.5×D)
- 10 pcs. HeliCoil threaded insert (2×D)
- 1 pc. Plastic case 180×165×45 mm (L×B×H)
Note
Adetailed instruction is included.
Original HeliCoil product from the German manufacturer Böllhoff.
| Storage method | Suitcase |
| Manufacturer | HeliCoil |
| Material | Chrome steel (colloquially known as stainless steel) |
| Area of application | Workshop accessories |
| Number of components | 30 pcs |
| Total length | 8 mm, 12 mm, 16 mm |
| Dimension thread insert | 1D, 1.5D, 2D |
| Ø bore | 8.3 mm |
| Thread type | MF8x1 (fine pitch thread) |
| Nominal diameter (thread) | 8 mm |
| Storage box dimension [mm] | 180 x 165 x 45 mm |
Explore categories from Screws & fastener sets
Moped fans also bought
GPO Leaf Gauge Set 0.05–1.00 mm, 13-piece
Manufacturer: GPO · Material: Metal · Surface: blank / oiled · Measuring range: 0.05 - 1 mm · Area of application: Measuring tool · Number of components: 13 pcs · Width: 13 mm · Total length: 105 mm · Thickness: 0.05 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 0.6 mm · Thickness: 0.7 mm · Thickness: 0.8 mm · Thickness: 0.9 mm · Thickness: 1 mm
EUR 14.60
swiing® revival stud bolt M6x106 (10.9 strength class)
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Thread length: 20 mm · Nominal diameter (thread): 6 mm · Total length: 106 mm · Puch OEM number: 360.1.10.034.1
EUR 2.20
Hot 
BOSCH breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Ø axle: 4 mm · Material: Steel · Cable available: Yes · Ø Internal flywheel: 90 mm · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Cable length: 100 mm · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · BOSCH OEM number: 1 217 013 025 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BERU OEM number: 0 340 100 710
EUR 24.40
HeliCoil thread repair set M6 (professional tool)
Material: Chrome steel (colloquially known as stainless steel) · Manufacturer: HeliCoil · Surface: coated · Storage method: Suitcase · Storage box dimension [mm]: 180 x 165 x 45 mm · Area of application: Workshop accessories · Number of components: 60 pcs · Thread type: M6x1 (standard thread) · Dimension thread insert: 1D · Dimension thread insert: 1.5D · Dimension thread insert: 2D · Nominal diameter (thread): 6 mm · Total length: 6 mm · Ø bore: 6.3 mm · Total length: 9 mm · Total length: 12 mm
EUR 101.60
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M5x0.8 (standard thread) · Total length: 23 mm · Thread length: 6 mm · Thread length: 12 mm · Nominal diameter (thread): 5 mm · Diameter: 4.9 mm · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.20
Transval speedometer drive 19" with hook axle 11 mm (for VDO speedometer cable)
Place of use: left · Place of use: right · Manufacturer: Transval · Ø outside: 41 mm · Material: Aluminum · Wheel size: 19 " · Ø mounting hole: 11 mm · 4-edge speedometer cable: 1.8 mm · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread)
EUR 44.00
Working late? Evening hours on Thursday until 20:00
