Black, adjustable shock absorbers with neon green coil springs for your moped, moped and small motorcycle.
The height and preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Bush diameter to mount: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
| Manufacturer | GPO |
| Hole spacing | 300 mm |
| Surface | varnished |
| Color | neon green, black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø outside | 50 mm |
| Ø spars | 30 mm |
| Mounting type | Nuts & bolts |
| Ø Fastening inside | 10 mm |
| Total length | 330 mm |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Color: blue · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.90
EUR 2’690.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Color: black · Total length: 335 mm · Manufacturer: YSS · Ø outside: 52 mm · Number of fixing points: 2 pcs · Hole spacing: 330 mm · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø spars: 32 mm · Mounting type: Nuts & bolts · Ø Fastening inside: 10 mm
EUR 159.20
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 14.60
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 21.90
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Hole spacing: 300 mm · Material: Aluminum · Material: Steel · Color: Chrome · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Number of fixing points: 2 pcs · Ø spars: 24 mm · Mounting type: Nuts & bolts · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Total length: 335 mm
EUR 61.20
Explore categories from Shock absorber & swingarm
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Material: Steel · Color: gray · Manufacturer: KMC · Surface: blank / oiled · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.30
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Material: Steel · Total length: 30 mm · Manufacturer: swiing® revival parts · Strength class: 10.9 · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Thread length: 12 mm
EUR 2.20
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Manufacturer: GPO · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Number of components: 7 pcs · Hole spacing outlet: 42 mm · Area of application: Standard
EUR 12.10
Hot
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Material: Brass · Total length: 6 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 19.50
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Height: 13.8 mm · Nominal diameter (thread): 26 mm · Drive: External hexagon · Width across flats: 30 mm · Thread depth: 12 mm · Thread type: MF26x1 (fine pitch thread) · Area of application: Standard
EUR 12.10
Working late? Evening hours on Thursday until 20:00
