Complete CDI ignition for anticlockwise rotating engines. Ignition is with light and has an operating voltage of 6V and 12 amps.
Connection of the supplied 6/12V voltage regulator:
- Pin 1: Yellow, current-carrying cable from the light coil
- Pin 2: Yellow cable to light
- Pin 3: Ground
The blue cable from the ignition switch (black part on the base plate) goes directly to the ignition coil. Because the ignition is contactless, the ignition can of course only be adjusted with a strobe light and a mark for the desired ignition time must first be attached to the magnetic flywheel and motor housing. The light coil is at the bottom, the switchgear at the top.
The strobe lamp and other useful items can be found under accessories.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Manufacturer: GPO · Material: Steel · Tension: 6 V, 12 V · Direction of rotation: left · Cone ratio: 1:5 · Ø Internal flywheel: 90.9 mm · Ø Flywheel outside: 116.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Weight: 900 g
Manufacturer: CEAB · Material: Plastic · Tension: 6 V · Type of current: Alternating current (AC) · Mounting type: Screws · Ø mounting hole: 6 mm
Manufacturer: GPO · Material: Aluminum, Copper, Plastic, Steel · Tension: 6 V, 12 V · Number of cables: 2 pcs · Cable length: 580 mm · Ø inside: 18.5 mm · Ø Internal flywheel: 90 mm · Ø outside: 90 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Area of application: Standard, Performance
Manufacturer: GPO · Color: black · Ø cable holder: 7 mm · Total length: 560 mm · Number of fixing points: 2 pcs · Hole spacing: 80 mm · Area of application: Standard
| Manufacturer | GPO |
| Mounting type | Screws |
| Number of fixing points | 4 pcs |
| Ø Internal flywheel | 90 mm |
| Tension | 6 V |
| Direction of rotation | left |
| Ø mounting plate | 90 mm |
| Area of application | Standard, Performance |
| Puch | ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 50/5 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV 505 (with pedal shaft) - 1A (AT) , 2A (HG) 535 |
| Zündapp Belmondo |
Ratings
Accessories & related products
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Color: black · Manufacturer: VEC · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing: 54 mm · Ø mounting hole: 4.6 mm · Ø Internal flywheel: 90 mm · Place of use: Internal (in the ignition) · Ø cable holder: 5 mm · Cable length: 140 mm · Cable length: 420 mm · Total length: 77 mm · Height: 48 mm · Area of application: Original · Area of application: Performance · Area of application: Standard
EUR 183.70
GPO ignition set CDI anticlockwise 12 V
Manufacturer: GPO · Material: Aluminum · Tension: 12 V · Performance: 17 W · Direction of rotation: left · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Original · Area of application: Standard
EUR 257.30
Moped fans also bought
swiing® revival stud bolt M5 x 23 inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Diameter: 4.9 mm · Total length: 23 mm · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Thread length: 12 mm · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.20
EUR 1.85
swiing® revival chain tensioner Inox | Sachs
Width: 19 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Plastic · Material: Steel · Color: Chrome · Color: black · Surface: chrome-plated · Ø outside chain roller: 40 mm · Ø inside chain roller (chain run): 29 mm · Roll width outside: 19 mm · Total length: 94 mm · Roller width inside (max. chain width): 10 mm · Thread type: M8x1.25 (standard thread) · Number of fixing points: 1 pcs
EUR 42.80
Gasket set with shaft seals diaphragm version | Sachs 50/2
Ø outlet inside: 28 mm · Number of components: 16 pcs · Hole spacing inlet: 31 mm · Hole spacing inlet: 67 - 31 mm · Hole pattern [mm]: 60 x 40 · Area of application: Standard · Pony OEM number: A2548 · Sachs OEM no.: 0286 125 021
EUR 48.90
Not in stock
GPO ignition plate 6 / 12V CDI ignition
Manufacturer: GPO · Material: Aluminum · Material: Copper · Material: Plastic · Material: Steel · Ø Internal flywheel: 90 mm · Tension: 6 V · Tension: 12 V · Number of cables: 2 pcs · Ø inside: 18.5 mm · Cable length: 580 mm · Ø outside: 90 mm · Ø bolt circle: 80 mm · Number of fixing points: 4 pcs · Area of application: Performance · Area of application: Standard
EUR 110.20
66HEROES cap nut M10.5x1 backpedal stainless steel polished
Surface: polished · Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Cap nut · Drive: External hexagon · Height: 26.2 mm · Thread depth: 23.4 mm · Thread type: MF10.5x1 (fine pitch thread) · Width across flats: 17 mm
EUR 14.60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
