
Slotted Ø 80x18 mm brake pads with return springs for the front and rear drum brakes on your Puch Maxi moped / moped.
Slotted brake pads enable improved heat and brake dust dissipation, resulting in an increased braking effect. This improved braking power is suitable for daily use, especially with slightly increased performance.
The pad compound corresponds to the AKOA alternative sold on the market. The quality is okay and the brakes fulfill their purpose, but do not reach the level of the swiing® brake pads in terms of braking performance and durability.
Note: These brake shoes are not suitable for bicycle riders.
Alternative brake pads with an even higher quality pad compound for racing applications, suitable springs and appropriate cleaning agents and lubricants can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Puch |
Accessories & related products
Explore categories from Drum brake
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm
EUR 12.10
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.45
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Material: Nylon · Color: black · Ø inside: 16.2 mm · Ø outside: 20.2 mm · Total length: 19 mm · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
EUR 3.05
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Total length: 185 mm · Ø shaft: 11.9 mm · Ø outside: 11.8 mm · Shank length: 100 mm · Thread length: 26 mm · Thread length: 52.5 mm · Width across flats: 19 mm
EUR 18.30
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 12.10






