Racing kit with 44 mm diameter for your Tomos moped / moped with A35 engine.
This 65 cc racing cylinder made of aluminum with nickel-silicon carbide coating (colloquially known as Nikasil) impresses with its good workmanship and long service life.
In order to get the full power out of the tuning cylinder, a racing exhaust and a carburetor with plenty of oomph should be fitted.
All necessary gaskets, piston pins, piston rings and circlips are included in the scope of delivery.
Note: Please observe the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
You can find the necessary racing equipment and other engine kits in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Camouflaged | No |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 65 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 47.8 mm |
| Nominal diameter | 44 mm |
| Ø outlet inside | 22.8 mm |
| Hole spacing inlet | 36 mm, 39 mm |
| Inlet window | 35.5 x 29.5 mm |
| Ø piston pin (B) | 12 mm |
| Hole pattern [mm] | 44 x 44 |
| Thread inlet | M5x0.8 (standard thread) |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
| Outlet type | slanted |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Decompressor | No |
| Tomos |
Accessories & related products
GPO piston 44 mm (12 mm KoBo) | Tomos A3/A35
Manufacturer: GPO · Nominal diameter: 44 mm · Ø outside piston (A): 43.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 21.9 mm · Curvature (D): 4.15 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm
EUR 46.50
Explore categories from Cylinder
Moped fans also bought
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Total length: 30 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread type: M6x1 (standard thread) · Thread length: 12 mm
EUR 2.20
Dell'Orto 15/15 SHA carburetor hand choke (with air filter)
Width: 70 mm · Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 15 mm · Carburetor type: SHA · Color: black · Total length: 82 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 68 · Height: 100 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 18 mm · Ø Output inside: 15 mm · Ø Air filter connection: 59 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning · Camouflaged: No
EUR 85.70
DMP 44 mm cylinder head (higher compression) | Tomos
Width: 145 mm · Manufacturer: DMP · Material: Aluminum · Surface: glass bead blasted · Ø cylinder: 44 mm · Total length: 145 mm · Ø screw holder: 8 mm · Height: 66 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Racing · Area of application: Tuning
EUR 73.40
Working late? Evening hours on Thursday until 20:00
