21 mm PHBG replica racing carburetor for universal use for your moped, moped and small motorcycle.
This racing carburetor is suitable for tuning and is designed for racing bikes between 50 and 75 cc.
The tuning carburetor has a cable-operated choke (starter slide / starter flap).
The fuel/air mixture can be perfectly adjusted using the main and secondary air flow as well as the mixture adjustment screw.
The carburetor has an M32x1.25 thread on the air filter side. The air filter can be attached directly to the thread.
Main thread size (M5): 90 (with throttle plate)
Adjacent thread size (idle thread): 50
Choked thread size: 60
Air filter connection diameter: 32 mm (M32 x 1.25)
Connection diameter of intake manifold: 24 mm (or 26 mm after removing the reducer sleeve)
Total height: 130 mm
Total width: 75 mm
Matching nozzles, air filters and intake manifolds can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Component group Carburetor | Carburetor complete |
| Area of application | Tuning |
| Carburetor type | PHBG AD |
| Height | 130 mm |
| Nominal diameter | 21 mm |
| Ø fuel hose connection | 6 mm |
| Width | 75 mm |
| Ø without reducing sleeve | 26 mm |
| Mounting type | Plug connection clamped |
| Ø Air filter connection | 32 mm |
| Ø Internal connection | 24 mm |
| Air filter connection thread | MF32x1.25 (fine pitch thread) |
| Mixed oil connection | Yes |
| Choke control | Cable choke |
| Choke nozzle size | 60 |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 90 |
| Size of secondary nozzle | 50 |
Accessories & related products
GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50
Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Surface: polished · Color: Chrome · Area of application: Tuning · Total length: 40 mm · Ø inside: 18.8 mm · Hole spacing inlet: 38 mm · Ø External connection: 23.9 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Height flange center hole: 45 mm · Total height: 57 mm
EUR 21.90
swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Total length: 8 mm
EUR 25.60
Hot 
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
EUR 25.60
swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Total length: 8 mm · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100
EUR 25.60
swiing® revival Nozzle M5 30–120 (Selection) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 31 · Nozzle size: 32 · Nozzle size: 33 · Nozzle size: 34 · Nozzle size: 35 · Nozzle size: 36 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 39 · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle size: 101 · Nozzle size: 102 · Nozzle size: 103 · Nozzle size: 104 · Nozzle size: 105 · Nozzle size: 106 · Nozzle size: 107 · Nozzle size: 108 · Nozzle size: 109 · Nozzle size: 110 · Nozzle size: 111 · Nozzle size: 112 · Nozzle size: 113 · Nozzle size: 114 · Nozzle size: 115 · Nozzle size: 116 · Nozzle size: 117 · Nozzle size: 118 · Nozzle size: 119 · Nozzle size: 120
EUR 4.30
66HEROES Mushroom air filter grille 28 - 32 mm black
Ø outside: 60 mm · Manufacturer: 66HEROES · Material: Metal · Camouflaged: No · Material: Rubber · Color: black · Filter type: Grille · Area of application: Tuning · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Total length: 114 mm · Mounting type: Plug connection clamped
EUR 19.50
Dell'Orto Secondary Jet PHBG Size 30–70 (Selection)
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Nozzle type: Secondary nozzle · Drive: Slot · Nozzle size: 30 · Nozzle size: 35 · Nozzle size: 40 · Nozzle size: 45 · Nozzle size: 50 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 65 · Nozzle size: 70
EUR 6.00
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Ø inside: 25.5 mm · Ø outside: 30 mm · Length spring hook: 50 mm · Leg length: 45 mm · Material: Spring steel · Surface: galvanized (blue) · Ø wire: 2.4 mm · Area of application: Original · Area of application: Standard · Total length: 125 mm
EUR 6.00
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Area of application: Tuning · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Number of components: 3 pcs
EUR 21.90
Hot
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 12.10
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44
EUR 12.10
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Total length: 135 mm · Number of fixing points: 4 pcs · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Width: 125 mm · Height: 55 mm · Ø cylinder: 45 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Camouflaged: Yes
EUR 40.30
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Drive: Slot · Screw head: Lens head · Surface: nickel-plated · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs
EUR 2.45
Intake manifold 46 / 47 mm cylinder | Puch
Ø inside: 19 mm · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Total length: 60 mm · Number of fixing points: 2 pcs · Ø External connection: 24 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Height flange center hole: 65 mm · Total height: 75 mm
EUR 48.90
Airsal 47 mm cylinder kit (straight exhaust) | Puch
Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 51 mm · Number of fixing points: 4 pcs · Nominal diameter: 43 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Hole spacing inlet: 38 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 257.30
Working late? Evening hours on Thursday until 20:00
