Shift lever suitable for Sachs 50 engines.
These are those engines that correspond to the type 50/2, but are equipped with the small Bing SSB carburetor without air filter cap and with a chain drive from the crankshaft to the clutch basket.
Attention: This shift shaft cannot be used with conventional Sachs 50/2 engines, as the fastening screw is not countersunk and would therefore touch the air filter cap.
| Material | Steel |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) |
Accessories & related products
swiing® revival oil drain plug M10x1 | Sachs 50/2, 503 2AL/2BL, 504/2 (A1470)
Manufacturer: swiing® revival parts · Material: Steel · Surface: burnished · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats Screw: 14 mm · Pony OEM number: A1470 · Sachs OEM no.: 0241 029 000
EUR 10.90
swiing® revival manual shift spring | Sachs 50/2, 503 2AL, 2BL (A1337)
Spring design: Tension spring · Ø inside: 6 mm · Length spring hook: 8 mm · Ø wire: 1.25 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Color: gray · Ø outside: 8.5 mm · Surface: burnished · Total length: 28 mm · Pony OEM number: A1337 · Sachs OEM no.: 0239 102 100
EUR 13.40
Explore categories from Gearbox & housing (motor)
Moped fans also bought
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Bearing type: Needle roller and cage assembly · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 16.2 · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 16.2 mm · Ø inside: 12 mm · Tomos OEM number: 035548
EUR 17.00
swiing® revival Beilagring shift lever Inox | Sachs 50/2 ML/AML (A1723)
Thickness: 6 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 13.2 mm · Nominal diameter inside: 13 mm · Ø outside: 17 mm · Nominal diameter (thread): 13 mm · Pony OEM number: A1723 · Sachs OEM no.: 0247 000 000
EUR 7.25
swiing® revival tension spring starter unit | Sachs 503 2AL / 2BL / AAL / ADV / AC (A1345)
Spring design: Tension spring · Manufacturer: swiing® revival parts · Material: Spring steel · Ø inside: 11.6 mm · Ø wire: 1.35 mm · Ø outside: 14.5 mm · Total length: 29.3 mm · Pony OEM number: A1345 · Sachs OEM no.: 0239 116 000
EUR 12.10
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Dimension needle bearing: 12/15 x 14.2 · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Ø outside: 15 mm · Width: 14.2 mm · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 14.60
Working late? Evening hours on Thursday until 20:00
