44 mm diameter racing cylinder kit, compatible with Tomos Sprint, Quadro, FunSport, and Classic mopeds equipped with an A35 engine.
This reliable everyday cylinder impresses with its suitability for daily use, though it doesn’t compete at the top level.
To get the full performance out of the 65 cc tuned cylinder, we recommend installing a racing exhaust and a matching carburetor.
The package includes the gray cast iron cylinder and the complete piston. The gaskets for the racing cylinder are not included.
Note: We recommend that you check the edges inside the cylinder and lightly deburr them if necessary, as they may occasionally be slightly sharp. Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find alternative racing cylinders and the matching gasket set in the accessories section.
Brand-name product from the manufacturer FAST ARROW.
| Nominal diameter | 44 mm |
| Manufacturer | FAST ARROW |
| Material | Gray cast iron |
| Area of application | Tuning |
| Surface | varnished |
| Displacement | 65 ccm |
| Ø cylinder neck | 47.9 mm |
| Ø outlet inside | 22.6 mm |
| Inlet window | 36.5 x 29.5 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 39 mm, 32 mm |
| Number of fixing points | 4 pcs |
| Ø piston pin (B) | 12 mm |
| Outlet type | slanted |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Tomos | Classic Quadro Sprint Fun Sport'R Roadie A35 |
Accessories & related products
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Total length: 30 mm · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Strength class: 10.9
EUR 2.20
Dell'Orto 15/15 SHA carburetor hand choke (with air filter)
Nominal diameter: 15 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Width: 70 mm · Carburetor type: SHA · Height: 100 mm · Total length: 82 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 68 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 59 mm · Ø Internal connection: 18 mm · Color: black · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Area of application: Racing · Area of application: Tuning
EUR 85.70
GPO gasket set 45 mm cylinder & diaphragm | Tomos A3, A35
Manufacturer: GPO · Number of components: 5 pcs · Material: Aluminum · Material: Composite materials · Material: Oiled paper · Ø cylinder: 45 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm / 39 x 36/32 mm · Area of application: Tuning · Decompressor: Yes
EUR 12.10
Not in stock
swiing® revival nozzle set M5 (60 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 11 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle thread: M5x0.8 (standard thread)
EUR 28.10
Not in stock
swiing® revival nozzle set M5 (70 - 80) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 11 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle thread: M5x0.8 (standard thread)
EUR 28.10
Explore categories from Cylinder
Moped fans also bought
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Total length: 30 mm · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Strength class: 10.9
EUR 2.20
GPO gasket set 45 mm cylinder & diaphragm | Tomos A3, A35
Manufacturer: GPO · Number of components: 5 pcs · Material: Aluminum · Material: Composite materials · Material: Oiled paper · Ø cylinder: 45 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm / 39 x 36/32 mm · Area of application: Tuning · Decompressor: Yes
EUR 12.10
Not in stock
Working late? Evening hours on Thursday until 20:00
