Special side pipe exhaust for your Puch Maxi S moped / moped.
The black-painted tuning exhaust is supplied ready to fit with the required screw-on bracket.
The mounting flange is attached to a slotted hole and can therefore be ideally positioned.
Note: For mounting on your Maxi N, you must either use an additional clamp or bridge the distance with an extension brace.
Depending on the batch, the paintwork is not highly resistant to vibrations or environmental influences. It is recommended to consolidate the paintwork using heat protection paint.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Ø outside | 60 mm |
| Ø Internal connection | 24.5 mm |
| Ø Flame tube outside | 28 mm |
| Mounting type | Nuts & bolts |
| Exhaust type | Sidepipe |
| Total length | 860 mm |
| Flame tube attachment | Stud bolts & nuts |
| Number of fixing points | 3 pcs |
| Puch | E50 |
Accessories & related products
Exhaust 18 mm replica (with number) | Puch Maxi S, N
Material: Steel · Color: Chrome · Total length: 920 mm · Manufacturer: Made in Portugal · Number of fixing points: 4 pcs · Surface: chrome-plated · Ø Silencer: 59 mm · Ø Internal connection: 14 mm · Mounting type: Welded lug · Ø Flame tube outside: 18 mm · Exhaust type: Flute · Flame tube attachment: Flange
EUR 71.00
Exhaust 22 mm 2-piece replica (with number) | Puch
Material: Steel · Color: Chrome · Total length: 920 mm · Manufacturer: Made in Portugal · Ø outside: 58 mm · Number of fixing points: 4 pcs · Surface: chrome-plated · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange
EUR 79.60
66HEROES Exhaust bracket 50 mm flat Inox
Thickness: 4 mm · Manufacturer: 66HEROES · Hole spacing: 50 mm · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Total length: 81 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Number of fixing points: 2 pcs
EUR 14.60
66HEROES Exhaust bracket 75 mm flat Inox
Thickness: 4 mm · Manufacturer: 66HEROES · Hole spacing: 75 mm · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Total length: 106 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Number of fixing points: 2 pcs
EUR 15.30
66HEROES Exhaust bracket 100 mm flat Inox
Thickness: 4 mm · Manufacturer: 66HEROES · Hole spacing: 100 mm · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Total length: 130 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Number of fixing points: 2 pcs
EUR 15.80
Not in stock
Hot 
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Material: Graphite / Graphite · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 9.10
Exhaust set Sidepipe Ø 28 / 60 mm chrome | Puch
Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø outside: 60 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Total length: 600 mm · Flame tube attachment: Flange
EUR 189.90
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø outside: 70 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Total length: 730 mm · Flame tube attachment: Flange
EUR 147.00
Exhaust Boss Demper Ø 28 / 60 mm chrome
Material: Steel · Color: Chrome · Surface: chrome-plated · Ø outside: 60 mm · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Dragpipe / sharp end · Total length: 580 mm · Flame tube attachment: Plug connection clamped
EUR 122.40
Exhaust sidepipe 28 mm chrome | Puch Maxi S
Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø outside: 60 mm · Number of fixing points: 3 pcs · Ø Internal connection: 24.5 mm · Mounting type: Nuts & bolts · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Total length: 860 mm · Flame tube attachment: Stud bolts & nuts
EUR 153.10
Explore categories from Exhaust system
Moped fans also bought
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Material: Nylon · Bearing type: Plain bearing · Color: black · Total length: 19 mm · Manufacturer: swiing® revival parts · Ø outside: 20.2 mm · Ø inside: 16.2 mm · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
EUR 3.05
Hot
swiing® revival side protection screw set black | Puch Maxi S
Material: Plastic · Material: Steel · Color: silver · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 15.80
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Height: 95 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 97.90
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 12.10
GPO side bars black matt (1A quality) | Puch Maxi S
Manufacturer: GPO · Ø outside: 12.5 mm · Hole spacing: 410 mm · Material: Steel · Color: black · Surface: varnished · Width: 170 mm · Height: 35 mm · Total length: 420 mm · Ø mounting hole: 8.1 mm · Mounting type: Screws · Number of fixing points: 4 pcs
EUR 36.70
MKX shock absorber 26 cm black
Manufacturer: MKX · Hole spacing: 260 mm · Material: Aluminum · Material: Steel · Color: black · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Number of fixing points: 2 pcs · Ø spars: 24 mm · Mounting type: Nuts & bolts · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Total length: 295 mm
EUR 61.20
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Color: black · Surface: varnished · Distance mudguard - center hole: 300 mm · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Number of fixing points: 4 pcs · Mounting type: Nuts & bolts · Wheel size: 17 " · Total length: 305 mm
EUR 18.30
Working late? Evening hours on Thursday until 20:00
