Chrome-plated 28 mm cigar exhaust with 70 mm outer diameter, which can be fitted to your Puch Maxi S/N, Puch X30 Sport NS/NL and Puch X30 NG-2A moped after a small adjustment.
Flame pipe and silencer are separate and are supplied without clamp as shown.
Notes: A 70 mm clamp (item no. 11543 or 18313) must be used to fit the Puch Maxi N.
For Puch X30 NG-2A, the spanner must be bent slightly so that it does not protrude from the rear case.
The M6 screw at the end of the pot must be checked and locked with an additional nut, otherwise the nut may loosen and the silencer insert may fall out.
A quality product made in Portugal.
| Ø outside | 70 mm |
| Manufacturer | Made in Portugal |
| Material | Steel |
| Color | Chrome |
| Surface | chrome-plated |
| Number of fixing points | 1 pcs |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Cigar |
| Total length | 920 mm |
| Flame tube attachment | Flange |
| Mounting type | Welded lug, Stud bolts & nuts |
| Puch | E50 Z50 (X30 Sport) |
Ratings
Accessories & related products
Hot 
swiing® ingenious exhaust clamp 28 mm heat-resistant
Ø inside: 25 - 28 mm · Manufacturer: swiing® ingenious parts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 40 mm · Width: 40 mm · Mounting type: Nuts & bolts
EUR 26.90
Explore categories from Exhaust system
Moped fans also bought
Hot
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Quantity: 6 pcs · Component group Carburetor: Spraying · Material: Brass · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 19.50
Hot
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 mm · Number of fixing points: 4 pcs · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No
EUR 52.60
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Total length: 66 mm · Ø Internal connection: 20 mm · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 97.90
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Total length: 46 mm · Height flange center hole: 43 mm · Total height: 53 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 42.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
