This permanent marker is suitable for marking or repairing small damaged areas and should therefore not be missing in any moped, moped or motorcycle workshop.
This paint marker was designed for smooth surfaces such as glass, metal or plastic.
Color: gold
Strike width: 2 - 4 mm
Tip: round tip
Water-resistant
Abrasion-resistant
Heat-resistant up to 400°C
Note: Before use, the permanent pen should be shaken briefly with the cap on and then the tip should be carefully pumped up and down on a test paper until color fills the tip.
Further variants of waterproof pens can be found in the accessories section.
Quality product from the German manufacturer edding.
| Temperature resistance (min.) | 0 - 400 °C |
| Manufacturer | edding |
| Color | gold |
| Line width | 2 - 4 |
| Area of application | Paint & varnish |
Accessories & related products
Explore categories from Miscellaneous
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 59 mm · Ø Silencer: 54.5 mm · Total length: 910 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Number of fixing points: 4 pcs · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Flame tube attachment: Flange
EUR 165.40
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Ø inside: 9 mm · Ø outside: 14 mm · Total length: 122 mm
EUR 3.30
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 12.10
Dell'Orto 16/16 SHA carburetor hand choke
Nominal diameter: 16 mm · Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Carburetor type: SHA · Total length: 82 mm · Ø without reducing sleeve: 21 mm · Width: 72 mm · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Height: 111 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 82 · Area of application: Tuning
EUR 85.70
GPO sprocket 9 - 21 teeth wide | Puch
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Surface: Hardened · Material: Steel · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Recording type: Interlocking · Total thickness: 4.6 mm
EUR 9.70
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
