Fork bush for your moped / moped with EBR forks and 30 mm fork leg diameter.
The bush for the fork leg is made of plastic with good sliding properties. The sliding sleeve should also be greased when installed in the fork.
Ø inner: 30 mm
Ø outer: 34 mm
Length: approx. 20 mm
To fully equip a fork, you need four pieces.
Price per piece.
Branded product from the Italian manufacturer EBR.
| Manufacturer | EWC |
| Material | Plastic |
| Ø outside | 34 mm |
| Color | black |
| Ø inside | 30 mm |
| Total length | 20 mm |
| Puch |
Accessories & related products
Motorex High Pressure Grease 3000 4.5 kg
Temperature resistance (min.): -30 - 150 °C · Manufacturer: Motorex · Area of application: Chemistry · Area of application: Fat · Contents [g]: 4500 g · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous
EUR 114.60
EUR 25.47/kg
Moped fans also bought
DR 43 mm cylinder kit 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Material: Gray cast iron · Area of application: Tuning · Surface: varnished · Nominal diameter: 43 mm · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Number of fixing points: 3 pcs · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 174.50
DR 43 mm cylinder kit 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Material: Gray cast iron · Area of application: Tuning · Surface: varnished · Nominal diameter: 43 mm · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Number of fixing points: 3 pcs · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 174.50
Headlight black | Piaggio Ciao PX, C24
Height: 90 mm · Width: 125 mm · Manufacturer: Made in Italy · Area of application: Original · Area of application: Standard · Housing material: Plastic · Color: black · Lens material: Plastic · Bulb holder: P26s · Mounting type: Screws · Test mark: none · Tension: 6 V · Tension: 12 V · Number of fixing points: 2 pcs · Speedometer recording: 48 mm · Switch included: Yes · Battery operated: No · Ø External connection: 6.3 mm · Depth: 147 mm · Piaggio OEM number: 584240
EUR 46.30
swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: swiing® revival parts · Thread type: MF10x1 (fine pitch thread) · Material: Chrome steel (known as Nirosta®) · Area of application: Standard · Number of components: 3 pcs · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Drive: Outer edge · Ø External head: 14 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Total length: 32 mm · Thread length: 13 mm
EUR 15.80
BGS bottom bracket / bottom hole puller with slide hammer
Span: 7 mm · Span: 28 mm · Manufacturer: BGS - Do it yourself · Clamping depth: 10 mm · Clamping depth: 20 mm · Thread type: M10x1.5 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Number of components: 10 pcs · Total length: 285 mm
EUR 158.60
Handlebar fork plate 24 cm Puch Maxi chrome
Height: 240 mm · Width: 625 mm · Ø outside: 22 mm · Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Fork plate holder length: 75 mm · Mounting type: Fork plate · Clamping diameter: 22 mm · Length handlebar ends: 150 mm · Crossbar: No
EUR 58.50
Collection only possible with online purchase and appointment.
