swiing® ingenious parts
Mofa parts thought through, perfected.
Rethinking moped parts: swiing® Ingenious Parts stands for innovation, precision, and performance. High-quality high-end and shadow tuning parts take original parts to the next level - for an optimized riding experience and maximum quality.
| Seat |  |
| Status |  Active |
| Foundation | 2014 |
Maximum performance
High-end tuning parts for outstanding performance and driving dynamics.
Shadow tuning
Discreet tuning parts, difficult to identify and inconspicuous.
Precision & quality
Developed with Swiss engineering.
Easy assembly
Well-thought-out solutions for quick and easy installation.
Innovation meets Swiss precision
swiing® Ingenious Parts combines innovation with Swiss perfection. Our goal: to rethink original parts and take them to the next level. With high-end and shadow tuning parts, we offer cutting-edge technological solutions for riders who value quality, performance and durability.
More than just spare parts
Our parts are more than just replacements – they are an evolution. Developed using the latest technology and the highest standards of functionality, swiing® Ingenious Parts enable an optimized driving experience. Because your moped deserves more.
The best products from swiing® Ingenious Parts More swiing® Ingenious Parts
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Diameter: 12 mm · Diameter: 24 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Width across flats trigger: 10 mm · Width across flats trigger: 17 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Total length: 100 mm · Area of application: (Dis)assembly tool
EUR 21.30
swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch
Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Thread length: 40.5 mm · Thread length: 50 mm · Material: Steel · Surface: galvanized (blue) · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Thread type: MF12x1 (fine pitch thread) · Height: 5.9 mm · Height: 9.9 mm · Total length: 165 mm · Ø outside: 29.02 mm · Ø inside: 12 mm · Ø shaft: 11.95 mm · Shank length: 74.5 mm · Width across flats: 19 mm
EUR 46.30
swiing® ingenious piston 44 mm | Puch
Manufacturer: swiing® ingenious parts · Ø outside piston (A): 43.96 mm · Compression height (C): 22.5 mm · Curvature (D): 3.6 mm · Total piston height (E): 52.6 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 44 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Weight piston kit: 91 g
EUR 53.50
swiing® ingenious piston 45 mm | Puch
Manufacturer: swiing® ingenious parts · Ø outside piston (A): 44.95 mm · Compression height (C): 22.4 mm · Curvature (D): 4.6 mm · Total piston height (E): 50.5 mm · Number of piston rings (F): 1 pcs · Nominal diameter: 45 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.9 mm · Ø piston pin (B): 12 mm · Weight piston kit: 91 g
EUR 53.50
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Material: Aluminum · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Width: 50 mm · Total length: 66 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Height: 95 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 95.20
swiing® ingenious wheel axle with bearing conversion kit rear spoke hub | Puch
Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 29 mm · Width across flats: 19 mm · Ø shaft: 19 mm · Diameter: 29 mm · Shank length: 100 mm · Ø inside: 12 mm · Total length: 190 mm · Thread type: MF12x1 (fine pitch thread) · Thread length: 29 mm · Thread length: 53 mm
EUR 46.30
swiing® ingenious exhaust manifold 28 mm chrome | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Ø inside: 25 mm · Ø outside: 28 mm · Total length: 380 mm · Mounting type: Stud bolts & nuts · Surface: chrome-plated · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
EUR 47.50
swiing® ingenious piston 40 mm | Cilo 502
Manufacturer: swiing® ingenious parts · Ø outside piston (A): 39.93 mm · Compression height (C): 27.9 mm · Curvature (D): 5.1 mm · Total piston height (E): 54 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 40 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 2 mm · Thick piston ring: 1.65 mm · Weight piston kit: 93 g
EUR 83.30
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Total length: 66 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 15 mm · Carburetor type: SRE · Width: 50 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 95.20
swiing® ingenious 16 mm intake manifold Bing SRE | Zündapp Belmondo (Type 247)
Manufacturer: swiing® ingenious parts · Material: Aluminum · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Ø inside: 16 mm · Hole spacing inlet: 40 mm · Mounting type: Screws · Area of application: Tuning
EUR 47.50
swiing® ingenious 15mm tuning set carburetor HG short | Sachs 503
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 32 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Area of application: Tuning · Ø Internal connection: 20 mm · Choke control: Hand choke · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 190.50
swiing® ingenious 15 mm carburetor set camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 38 mm · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Area of application: Tuning · Ø Internal connection: 20 mm · Choke control: Hand choke · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 124.90
swiing® ingenious tuning set 38 mm (with choice of exhaust) | Puch E50, ZA50
Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing® ingenious parts · Manufacturer: swiing® revival parts · Camouflaged: Yes · Displacement: 50 ccm · Ø piston pin (B): 12 mm · Nominal diameter: 38 mm · Outlet type: straight · Area of application: Tuning
EUR 357.20
swiing® ingenious 16 mm intake manifold (Dell'Orto SHA) | Puch X30 NS, NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 16 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Ø External connection: 19 mm · Area of application: Tuning
EUR 82.80
swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Ø inside: 16 mm · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Total length: 35 mm · Total height: 42 mm · Height flange center hole: 35 mm · Hole spacing inlet: 40 mm
EUR 47.50
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Total height: 53 mm · Total length: 46 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Height flange center hole: 43 mm · Camouflaged: Yes · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 41.60
Hot
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Ø inside: 11.25 mm · Ø inside: 15 mm · Total length: 53.5 mm · Width: 9 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm
EUR 35.10
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Component group Carburetor: Carburetor complete · Choke control: Hand choke · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Hole spacing inlet: 32 mm · Nozzle thread: M3.5x0.6 (standard thread)
EUR 146.40
swiing® ingenious 19 mm PHBG intake manifold Speed Engine | Piaggio Ciao, SI, Bravo
Manufacturer: swiing® ingenious parts · Surface: anodized · Color: graphite colors · Material: Aluminum · Ø External connection: 24 mm · Hole spacing inlet: 36 mm · Ø inside: 19 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Tuning
EUR 35.60
swiing® ingenious exhaust manifold 32 mm chrome | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 26.3 mm · Ø inside: 29.8 mm · Ø outside: 32.4 mm · Total length: 435 mm · Mounting type: Bride · Ø External connection: 29 mm
EUR 53.50
swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
Bearing type: Deep groove ball bearing · Inner ring width: 9 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Surface: blank · Material: Plastic · Material: Steel · Ø inside: 12 mm · Width: 9 mm · Ø outside: 29.02 mm
EUR 10.60
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Dimension needle bearing: 12/15 x 14.2 · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Ø inside: 12 mm · Ø outside: 15 mm · Width: 14.2 mm · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
EUR 14.20
swiing® ingenious 280 g additional weight HPI Inox
Manufacturer: swiing® ingenious parts · Thickness: 12.5 mm · Material: Chrome steel (colloquially known as stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: blank · Ø inside: 39 mm · Number of fixing points: 7 pcs · Ø outside: 95 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10 mm · Ø bolt circle: 50 mm · Ø bolt circle: 55 mm · Weight: 300 g
EUR 59.40
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø inside: 27.4 mm · Thickness: 3 mm · Place of use: Exhaust · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 8.85
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø inside: 4.3 mm · Ø wire: 2 mm · Ø outside: 8.45 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: red · Number of components: 3 pcs · Total length: 26.6 mm · Area of application: Tuning
EUR 21.30
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø inside: 4.3 mm · Ø wire: 2.05 mm · Ø outside: 8.45 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: yellow · Number of components: 3 pcs · Total length: 26.9 mm · Area of application: Tuning
EUR 21.30
swiing® ingenious 16 mm SHA intake manifold Speed Engine | Piaggio Ciao, SI, Bravo
Manufacturer: swiing® ingenious parts · Camouflaged: No · Surface: anodized · Color: graphite colors · Material: Aluminum · Ø External connection: 19 mm · Total length: 29 mm · Hole spacing inlet: 36 mm · Ø inside: 16 mm · Mounting type: Screws · Total height: 24.2 mm · Number of fixing points: 2 pcs · Area of application: Tuning
EUR 39.20
swiing® ingenious carburetor set 15 mm (Bing SRE) | Puch X30 NS, NL
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Choke control: Hand choke · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Area of application: Tuning · Hole spacing inlet: 38 mm · Ø Inside entrance: 15 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Nozzle thread: M3.5x0.6 (standard thread) · Clamping screw torque (max.): 4 N/m
EUR 127.30
swiing® ingenious 16 mm carburetor set (Dell'Orto SHA) | Puch X30 NS, NL
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Nominal diameter: 16 mm · Choke control: Hand choke · Carburetor type: SHA · Ø fuel hose connection: 6 mm · Area of application: Tuning · Hole spacing inlet: 38 mm · Ø Inside entrance: 16 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Output inside: 16 mm · Nozzle thread: M5x0.8 (standard thread)
EUR 154.70
swiing® ingenious piston 40 mm | Sachs 503
Nominal diameter: 40 mm · Manufacturer: swiing® ingenious parts · Ø outside piston (A): 39.97 mm · Compression height (C): 28 mm · Curvature (D): 3.5 mm · Total piston height (E): 54 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm · Thick piston ring: 1.7 mm · Weight piston kit: 83 g
EUR 65.40
swiing® ingenious gasket set 44 - 45 mm cylinder | Puch
Manufacturer: swiing® ingenious parts · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole pattern [mm]: 44 x 44 mm · Area of application: Tuning · Hole spacing outlet: 42 mm · Decompressor: Yes
EUR 11.80
Other mofakult brands
swiing® Revival Parts
GPO – GOOD PARTS ONLY.
Collection only possible with online purchase and appointment.
