Cable duct made of dark gray plastic for Puch Maxi S, N and Supermaxi LG1, LG2 mopeds / mopeds.
The cable tunnel is mounted underneath the tank and ensures clean routing of all cables. Throttle and clutch cables are pulled through the side openings of the cable cover.
Further cable guides in various colors can be found in the accessories section.
Details
| Material | Plastic |
| Width | 58 mm |
| Color | gray |
| Total length | 320 mm |
| Height | 22 mm |
| Ø mounting hole | 5.3 mm |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Color: silver · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 15.50
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Drive: Slot · Drive: Triangular head · Color: Chrome · Thread type: M5x0.8 (standard thread) · Color: silver · Total length: 48 mm · Total length: 63 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 18.10
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Component group Carburetor: Adjusting screws, float, etc. · Color: black · Surface: blank · Color: silver · Ø outside: 2.6 mm · Ø outside: 4 mm · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Total length: 12 mm · Width: 3.3 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
EUR 8.30
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Area of application: Tuning · Ø inside: 14.5 mm · Ø External connection: 20 mm · Total length: 47 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Total height: 54 mm · Height flange center hole: 43 mm · Camouflaged: Yes · Hole spacing inlet: 38 mm
EUR 14.40
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Width: 125 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No
EUR 39.60
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: black · Surface: powder-coated · Ø inside: 94 mm · Number of teeth: 45 pcs · Thickness: 4.5 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
EUR 23.90
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Material: Plastic · Test mark: none · Bulb holder: BA15s · Color: black · Color: red · Tension: 6 V · Height: 110 mm · Number of fixing points: 2 pcs · Width: 60 mm · Depth: 80 mm · Mounting type: Nuts & bolts · Brake light: No · Battery operated: No · Ø Receptacle: 4 mm · Reflectors: Yes
EUR 43.90
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Thread type: M6x1 (standard thread) · Color: silver · Screw head: Hexagon · Thread length: 22 mm · Shank: No · Width across flats SW: 10 mm · Strength class: 8.8 · Number of components: 24 pcs
EUR 9.50
Collection only possible with online purchase and appointment.
