Drive belt with 112.5 mm length for your Piaggio Si moped / moped with mono drive.
The following combinations are possible with this mono belt:
| Ø clutch | Ø Pully | Engine position | Pully type |
| 56 mm | 75 mm | Back | swiing® |
| 56 mm | 70 mm | Center | swiing® |
| 56 mm | 70 mm | Center - front | Surflex |
| 56 mm | 65 mm | Front | swiing® |
| 56 mm | 65 mm | Front | Replica |
| 66 mm | 60 mm | Center - rear | swiing® |
| 66 mm | 60 mm | rear | Replica |
| 66 mm | 55 mm | Center - front | swiing® |
| 66 mm | 55 mm | Center | Replica |
Note: Check the diameter of your mono clutch and pully before purchasing to ensure you order the correct drive belt.
You can find more Pully belts, alternative Vario variants as well as drive pulleys and clutches in the accessories section.
Quality product from the German manufacturer BOSCH in original equipment quality.
| Manufacturer | BOSCH |
| Outer width | 10 mm |
| Rolling circumference | 1125 mm |
| Belt profile | toothed / serrated |
| Height | 8.2 mm |
| Gearbox type | Mono |
| Piaggio | Si |
Accessories & related products
GPO clutch 56 mm | Piaggio, Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Ø Outer pulley: 56 mm · Material: Steel · Number of jaws: 3 pcs · Number of springs: 2 pcs · Number of springs: 3 pcs · Ø inside: 82 mm · Ø outside: 90 mm · Area of application: Standard · Piaggio OEM number: 1651505 · Piaggio OEM number: 4503595
EUR 109.80
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Ø wire: 2.4 mm · Leg length: 45 mm · Length spring hook: 50 mm · Surface: galvanized (blue) · Material: Spring steel · Total length: 125 mm · Ø inside: 25.5 mm · Ø outside: 30 mm · Area of application: Original · Area of application: Standard
EUR 6.00
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Material: Plastic · Test mark: none · Bulb holder: BA15s · Tension: 6 V · Color: black · Color: red · Number of fixing points: 2 pcs · Ø Receptacle: 4 mm · Depth: 80 mm · Battery operated: No · Width: 60 mm · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Height: 110 mm
EUR 44.60
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Wheel size [inch]: 17 " · Folding the ends: closed folded · Color: Chrome · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
EUR 42.60
BOSCH Breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Material: Steel · Area of application: Original · Area of application: Standard · Cable available: Yes · Cable length: 100 mm · Ø Internal flywheel: 90 mm · Ø axle: 4 mm · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · Sachs OEM no.: 0283 116 102 · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
EUR 24.30
Collection only possible with online purchase and appointment.
