A supposed 19 mm Bing SRF replica carburetor.
The passage is slightly conical, so that the diameter is 19 mm on the outside, but only slightly larger than 17 mm in the middle.
The carburetor is not of the same quality as original Bing products, but is a good and inexpensive alternative.
Sink block is for nozzles with M4 thread.
ØAir filter screen: 60.2 mm
Connection diameter to intake manifold: 23 mm
Mounted nozzle size: unknown
| Nominal diameter | 17 mm |
| Area of application | Tuning |
| Component group Carburetor | Carburetor complete |
| Carburetor type | SRF |
| Choke control | Hand choke |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Mounting type | Plug connection clamped |
| Ø Air filter connection | 60.2 mm |
| Ø Internal connection | 23 mm |
| Ø fuel hose connection | 6 mm |
| Nozzle thread | M4x0.7 (standard thread) |
| Puch |
| Zündapp Belmondo |
| Kreidler |
Ratings
Moped fans also bought
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 50 mm · Mounting type: Union nut
EUR 33.70
Inox
Hot 
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: chrome-plated · Color: Chrome · Thread size: M8 · Thread type: M8x1.25 (standard thread) · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Total length: 360 mm · Test mark: none · Clamping diameter: 22 mm
EUR 34.20
swiing® revival nozzle set M4 (70 - 90) Bing 18, Bing 85
Drive: Slot · Manufacturer: swiing® revival parts · Material: Brass · Quantity: 11 pcs · Component group Carburetor: Spraying · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Nozzle thread: M4x0.7 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90
EUR 26.90
66HEROES Air filter mushroom grille black Dell'Orto SHA (Ø=60 mm)
Manufacturer: 66HEROES · Material: Metal · Camouflaged: No · Material: Rubber · Filter type: Grille · Color: black · Ø outside: 87 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Length rubber part: 18 mm · Ø Internal connection: 60 mm · Length of filter section: 28 mm · Total length: 46 mm · Area of application: Tuning
EUR 24.40
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Manufacturer: BAD ASS · Material: Aluminum · Camouflaged: No · Ø inside: 17.8 mm · Ø External connection: 20 mm · Mounting type: Stud bolt · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total height: 55 mm · Height flange center hole: 45 mm · Total length: 65 mm · Area of application: Tuning
EUR 91.80
swiing® ingenious intake manifold 17 mm SRF | Puch Z50
Ø inside: 17 mm · Manufacturer: swiing® ingenious parts · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Number of fixing points: 2 pcs · Ø External connection: 23 mm · Total length: 45 mm · Height flange center hole: 61 mm · Total height: 73 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm
EUR 61.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
