47.0 mm piston with two standard rectangular piston rings with internal circlips (IS) for the MetraKit cylinder on your Puch moped / moped.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their positions and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
Corresponding assembly tools, piston rings, piston pin retainers etc. can be found under accessories.
Quality product from the Spanish manufacturer Barikit.
Details
| Nominal diameter | 47 mm |
| Manufacturer | Barikite |
| Ø outside piston (A) | 47 mm |
| Compression height (C) | 22.1 mm |
| Curvature (D) | 3.47 mm |
| Total piston height (E) | 52.47 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Internal fuse (IS) |
| Ø piston pin (B) | 12 mm |
| Piston weight | 115 g |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Metrakit 47 mm cylinder kit 75 ccm
Manufacturer: Metracite · Material: Gray cast iron · Surface: varnished · Area of application: Tuning · Displacement: 75 ccm · Nominal diameter: 47 mm · Crankshaft stroke: 43 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 415.70
Not in stock
Barikit piston 48 mm MetraKit cylinder oversize | Puch
Manufacturer: Barikite · Nominal diameter: 48 mm · Ø outside piston (A): 47.95 mm · Compression height (C): 22 mm · Curvature (D): 3.45 mm · Total piston height (E): 52.45 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1 mm · Ø piston pin (B): 12 mm · Piston weight: 124 g
EUR 79.40
Moped fans like you also bought:
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Area of application: Racing · Area of application: Tuning · Nominal diameter: 19 mm · Carburetor type: PHBG CS · Width: 70 mm · Choke control: Hand choke · Height: 124 mm · Total length: 82 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Choke nozzle size: 60 · Camouflaged: No · Nozzle size: 75 · Size of secondary nozzle: 45
EUR 146.60
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Thread type: M8x1.25 (standard thread) · Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Color: silver · Drive: External hexagon · Drive: Slot · Surface: galvanized (blue) · Screw head: Hexagon · Total length: 18 mm · Thread length: 12 mm · Puch OEM number: 901.1053
EUR 4.30
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Number of components: 1 pcs · Surface: galvanized (blue) · Cable length: 2200 mm · Area of application: Standard
EUR 3.45
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Material: Steel · Number of components: 1 pcs · Surface: galvanized (blue) · Cable length: 1600 mm · Area of application: Standard
EUR 3.45
Collection only possible with online purchase and appointment.
