43 mm racing cylinder with 63 cc, suitable for Sachs mopeds / mopeds with 503 2AL, AAL, 2BL, ABL CH engines.
Thanks to the additional holes for the cylinder head bolts and the two mounts for the blower cover, the cylinder can also be fitted to the Sachs 50/2 and 502 models, although the intake and exhaust accessories must be made by yourself.
The large displacement and the huge intake ensure plenty of torque.
The cylinder can be used on both Sachs 50/2 and Sachs 503 mopeds with the original cylinder head, but it should be noted that the pinch point at the narrowest point should be at least 1.5 mm. To ensure optimum operation and thus tease the maximum power out of the cylinder, we recommend adapting the cylinder head to a combustion chamber diameter of 43 mm. It is best to use the 41 mm cylinder head from the accessories as a basis for this.
We also recommend that you use reinforced clutch springs so that the entire engine power can be transferred to the rear wheel. You can find these in the accessories section.
The BADASS 17 mm or 15 mm intake manifold is the perfect match for the cylinder, with which either a 15 mm Bing SRE or a 17 mm carburettor can be used.
You can find the intake manifolds, as well as carburetors, in the accessories section.
Details:
- Grey cast iron reproduction cylinder with Ø 43.0 mm bore
- Slot-controlled
- Ø 19 mm intake
- Optimized Öoverflow channels
- Improved timing
- No spindling of the engine housing necessary (Ø cylinder neck 45.0 mm)
- Ø external exhaust manifold connection: 26 mm
- Incl. Ø 43 mm piston from the Italian manufacturer -GOL-
Differences to the GPO Pomodoro - replica cylinder:
- The BADASS 15 mm & 17 mm intake manifolds fit perfectly on the cylinder
- It is not possible to fit original or swiing intake manifolds
- Thanks to the holes for the cylinder head and blower, there is no risk of damage;
- There is the option of adapting the cylinder to a 50/2 or 502 engine
- Lower intake timing
Installation instructions in German and the matching piston are included in the scope of delivery.
Attention: It is essential to replace the rubber silencers on 503 BL engines with aluminum silencers due to the increased power output in order to avoid fatigue fracture of the exhaust flange.
The aluminum silentblocs, matching gaskets, reinforced clutch springs and other add-on parts such as intake manifolds, carburettors, exhausts, etc. can be found in the accessories section.
Made by the BADASS brand.
The set includes the following fixed parts:
Hole pattern [mm]: 60 x 40 · Manufacturer: BAD ASS · Material: Gray cast iron · Nominal diameter: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22.5 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32.5 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning
Details
| Manufacturer | BAD ASS |
| Material | Gray cast iron |
| Surface | sandblasted |
| Displacement | 63 ccm |
| Crankshaft stroke | 42 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 45 mm |
| Nominal diameter | 43 mm |
| Ø Outlet outside | 26 mm |
| Ø outlet inside | 23 mm |
| Ø Inlet inside | 19 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 32 mm |
| Outlet type | clamped |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
| Camouflaged | No |
| Area of application | Tuning |
Suitable for the following models
| Sachs | 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
17 mm Bing SRF carburetor (replica)
Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Width: 64 mm · Nominal diameter: 17 mm · Carburetor type: SRF · Choke control: Hand choke · Total length: 78 mm · Nozzle thread: M4x0.7 (standard thread) · Ø fuel hose connection: 6 mm · Height: 117 mm · Ø Internal connection: 23 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.xx · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 79.40
swiing nozzle set M3.5 (58 - 68) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Total length: 6 mm · Drive: Slot
EUR 19.50
swiing® ingenious 15mm tuning set carburetor HG short | Sachs 503
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 195.60
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Choke control: Hand choke · Width: 50 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 66 mm · Height: 95 mm · Nozzle size: 62 · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 97.70
swiing® revival air filter Racing | Sachs 503
Height: 52 mm · Width: 68 mm · Total length: 165 mm · Manufacturer: swiing® revival parts · Material: Plastic · Area of application: Tuning · Color: black · Filter type: Racing screen · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Camouflaged: No
EUR 73.30
swiing® revival cylinder base gasket 0.3 mm | Sachs 503
Nominal diameter: 45 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Oiled paper · Place of use: Cylinder base · Ø inside: 45 mm · Thickness: 0.3 mm · Ø cylinder: 38 - 40 mm · Hole pattern [mm]: 60 x 40
EUR 4.15
swiing resonance exhaust set Ø 28 / 70 mm | Sachs 503
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Plug connection clamped
EUR 171.10
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Material: Aluminum · Surface: anodized · Manufacturer: swiing® revival parts · Total length: 13 mm · Nominal diameter inside: 8.5 mm · Ø inside: 8.3 mm · Ø Bundle: 26 mm · Ø outside: 21.95 mm · Alternative version of the Pony OEM number: A4286 · Alternative version of the Sachs OEM number: 0251 121 000
EUR 29.20
Hot 
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Manufacturer: BAD ASS · Area of application: Tuning · Material: Aluminum · Ø inside: 17 mm · Thread type: M6x1 (standard thread) · Mounting type: Screws · Number of fixing points: 3 pcs · Hole spacing inlet: 32 mm · Total length: 54 mm · Height flange center hole: 45 mm · Total height: 56.5 mm · Ø External connection: 23 mm · Camouflaged: No
EUR 91.60
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Material: Aluminum · Manufacturer: swiing® ingenious parts · Width: 47 mm · Total length: 61.5 mm · Height: 89 mm · Height: 112 mm · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 17 mm · Carburetor type: SRF · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 23 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 146.60
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Material: Aluminum · Manufacturer: BAD ASS · Area of application: Tuning · Ø inside: 17.8 mm · Total length: 65 mm · Ø External connection: 20 mm · Hole spacing inlet: 32 mm · Total height: 55 mm · Number of fixing points: 2 pcs · Height flange center hole: 45 mm · Mounting type: Stud bolt · Camouflaged: No
EUR 91.60
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Number of components: 2 pcs · Manufacturer: GPO · Material: Oiled paper · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Thickness: 0.3 mm · Thickness: 1 mm · Area of application: Tuning · Hole spacing inlet: 32 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm
EUR 17.70
GPO piston 43 mm | Sachs 50/2, 50/3, 50/4
Manufacturer: GPO · Nominal diameter: 43 mm · Thick piston ring: 1.8 mm · Ø outside piston (A): 42.94 mm · Compression height (C): 27.7 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.2 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm
EUR 54.90
Moped fans like you also bought:
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Area of application: Standard · Material: Rubber · Surface: raw · Color: black · Place of use: Carburetor · Ø outside: 20 mm · Ø inside: 17.2 mm · Cord thickness: 1.4 mm · Number of components: 1 pcs · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.55
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Area of application: Standard · Material: Brass · Material: Steel · Surface: blank · Stock number: BO15 · Ø outside: 40 mm · Ø inside: 15 mm · Width: 10 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 30.50
Large gasket set with shaft seals Engine | Sachs 503
Area of application: Standard · Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 13.3 mm · Hole spacing inlet: 32 mm · Number of components: 14 pcs · Hole pattern [mm]: 60 x 40
EUR 48.80
Hot
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Manufacturer: BAD ASS · Area of application: Tuning · Material: Aluminum · Ø inside: 17 mm · Thread type: M6x1 (standard thread) · Mounting type: Screws · Number of fixing points: 3 pcs · Hole spacing inlet: 32 mm · Total length: 54 mm · Height flange center hole: 45 mm · Total height: 56.5 mm · Ø External connection: 23 mm · Camouflaged: No
EUR 91.60
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Material: Aluminum · Manufacturer: swiing® ingenious parts · Width: 47 mm · Total length: 61.5 mm · Height: 89 mm · Height: 112 mm · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 17 mm · Carburetor type: SRF · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 23 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 146.60
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Number of components: 2 pcs · Manufacturer: GPO · Material: Oiled paper · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Thickness: 0.3 mm · Thickness: 1 mm · Area of application: Tuning · Hole spacing inlet: 32 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm
EUR 17.70
Collection only possible with online purchase and appointment.
