Not so nice 
Complete replica of the original Vario for your Piaggio Ciao, Si, Bravo, or Boxer moped with Variomatic transmission.
Weight of the Vario rollers: 6 grams
; dimensions of the weights: 14 x 14 mm
The complete set, as shown in the picture, is included in the package.
So-so! – We strive to offer you the widest selection of moped replacement parts. However, the quality of this product is rather so-so, and we do not recommend it. If you still decide to go with this item, we understand your choice, but we cannot offer any warranty or exchange.
The main problem with this variator lies in the sleeve used. Depending on the batch, the bore may not be centered (which leads to severe vibrations), or the sleeve may not even fit onto the crankshaft due to poor tolerances. You can replace the spacer bolt with a high-quality version from our accessories section so that the variator can be used.
You’ll find racing variators, as well as other parts for the variator system and the aforementioned spacer bolt, in the accessories section.
Affordable product under the ARUSU brand (Genuine Parts & Accessories).
Original Piaggio part number: 221163
| Manufacturer | ARUSU |
| Gearbox type | Vario |
| Number of weights | 8 pcs |
| Weight Standard weights | 6 g |
| Ø Weights | 14 mm |
| Length Weights | 14 mm |
| Ø External variator | 85 mm |
| Piaggio OEM number | 221163 |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
Explore categories from Variomatic belt drive
Moped fans also bought
Triangular bearing plate galvanized | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Width: 99 mm · Ø axle: 15 mm · Total length: 17.5 mm · Area of application: Original · Number of fixing points: 2 pcs · Thread length: 13 mm · Piaggio OEM number: 124963
EUR 24.40
Olympia torque converter Vario Ø 100 mm | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Olympia · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Gearbox type: Vario · Thickness: 74 mm · Angle pulley: 17 ° · Number of jaws: 3 pcs · Ø outside: 100 mm · Weight: 1930 g · Number of springs: 3 pcs · Hardness level Counter pressure spring: Standard (30 kg - steel-colored)
EUR 171.50
Not in stock
Nut M8 SW24 crankshaft / Variomat original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Thread type: M8x1.25 (standard thread) · Height: 7 mm · Drive: External hexagon · Width across flats: 24 mm · Nominal diameter (thread): 8 mm
EUR 5.40
swiing® revival locking plate nut Variomatic Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Number of lobes: 1 pcs · Ø inside: 8.15 mm · Ø outside: 33.5 mm · Area of application: Original · Area of application: Standard
EUR 4.20
swiing® ingenious nut M8 crankshaft / Variomat | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Width across flats: 24 mm · Height: 6 mm
EUR 10.60
swiing® revival spacer sleeve Ø 12x22x9.5 mm Variomatic Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Total length: 9.5 mm · Ø inside: 12.05 mm · Nominal diameter inside: 12 mm · Ø outside: 22 mm · Piaggio OEM number: 103241
EUR 8.45
Working late? Evening hours on Thursday until 20:00
