38 mm tuning cylinder in the "Power Edition" version made of aluminum including cylinder head with 50 cc displacement suitable for mopeds / mopeds with Sachs 503 2AL, AAL, 2BL, ABL CH engine.
The tuning kit made of cast aluminum with nickel-silicon carbide coating (colloquially known as Nikasil) offers a good increase in performance over the entire speed range, with a focus on low speeds and high torque. Compared to the original cylinder, this tuning cylinder has had the seal removed and the inlet enlarged. The overflow channels as well as the exhaust and intake have been adapted to optimize the timing. In addition, the exhaust duct has been designed at a more favorable angle. All housing covers can still be fitted.
Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
| Manufacturer | AKOA |
| Material | Aluminum |
| Camouflaged | No |
| Surface | Nickel silicon carbide (colloquially known as Nikasil) |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 38 mm |
| Ø cylinder neck | 45.5 mm |
| Ø Outlet outside | 25.9 mm |
| Ø Inlet inside | 15.8 mm |
| Ø outlet inside | 20.5 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
| Ø piston pin (B) | 12 mm |
| Outlet type | clamped |
| Hole spacing inlet | 32 mm |
| Sachs | 503 - AAL , ABL , 2AL / 2BL |
Accessories & related products
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Height: 95 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Total length: 66 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Area of application: Tuning · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 97.90
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning
EUR 220.50
Not in stock
GPO 43 mm "Pomodoro" cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Material: Gray cast iron · Manufacturer: GPO · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Area of application: Tuning · Hole pattern [mm]: 40 x 60 / 37 x 37 · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 269.50
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Hole spacing inlet: 32 mm · Thread type: M6x1 (standard thread) · Ø inside: 15 mm · Area of application: Tuning · Number of fixing points: 2 pcs · Total length: 50 mm · Ø External connection: 20 mm · Alternative version of the Pony OEM number: A2177
EUR 61.20
swiing® ingenious decompressor set | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Copper · Material: Steel · Thread type: M10x1.5 (standard thread) · Ø outside: 14 mm · Width across flats: 14 mm · Area of application: Standard · Total length: 21.5 mm · Thread length: 14 mm · Sachs OEM no.: 0291 013 300
EUR 61.20
AKOA 38 mm cylinder head "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Ø cylinder: 38 mm · Ø outside: 84 mm · Height: 29 mm · Hole pattern [mm]: 37 x 37 · Area of application: Tuning · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 61.20
AKOA 40 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 40 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 54 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 257.30
AKOA 41 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 41 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø Inlet inside: 15.8 mm · Ø outlet inside: 20.5 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped · Camouflaged: No
EUR 257.30
AKOA 43 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø Inlet inside: 15.8 mm · Ø outlet inside: 20.5 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped · Camouflaged: No
EUR 330.80
Explore categories from Cylinder
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch · Temperature resistance (min.): -30 - 220 °C
EUR 13.40
EUR 29.78/l
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Inner ring width: 10 mm · Manufacturer: NSK · Bearing cage: Brass cage ball-guided · Material: Brass · Material: Steel · Bearing type: Shoulder bearing · Ø inside: 15 mm · Ø outside: 40 mm · Stock number: BO15 · Width: 10 mm · Ball bearing closed: No · Area of application: Standard · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 30.50
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Height: 95 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Total length: 66 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Area of application: Tuning · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 97.90
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Material: Plastic · Color: black · Filter type: Racing screen · Width: 68 mm · Height: 52 mm · Ø Internal connection: 20 mm · Total length: 165 mm · Mounting type: Plug connection clamped · Area of application: Tuning · Camouflaged: No
EUR 73.40
AKOA 38 mm cylinder head for decovalve | Sachs 503 2AL, AAL, 2BL, ABL
Material: Aluminum · Height: 29 mm · Manufacturer: AKOA · Ø outside: 84 mm · Number of fixing points: 4 pcs · Ø cylinder: 38 mm · Candle thread: short · Decompressor: M10x1.5 · Area of application: Tuning · Hole pattern [mm]: 37 x 37 · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 73.40
AKOA 38 mm cylinder head "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Ø cylinder: 38 mm · Ø outside: 84 mm · Height: 29 mm · Hole pattern [mm]: 37 x 37 · Area of application: Tuning · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 61.20
AKOA 38 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Nominal diameter: 38 mm · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Decompressor: No · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped · Area of application: Tuning · Camouflaged: No
EUR 220.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
