Product description

Air filter housing for your Puch MS50V, VS50, DS50, MV50, R50 and VZ50 small motorcycle.
The air filter screen is already installed in the housing.

Air intake connection dimensions:
Width: 22 mm
Length: 46 mm

You can find the matching intake rubber in the accessories section.

Product details

Material	Plastic
Area of application	Standard
Width	46 mm
Color	gray
Total length	22 mm
Mounting type	Plug connection
Puch OEM number	357.1.15.070.0

Suitable for the following models

Puch

Accessories & related products

For: DKW · Victoria

20885

Engine gasket set | M51/ MS50/ MS51

Number of components: 7 pcs · Area of application: Standard

EUR 34.10

Brake shoes Ø 105 x 25 | Puch MV, DS, VS, VZ

For: Puch

23143

Brake shoes Ø 105 x 25 | Puch MV, DS, VS, VZ

Width: 25 mm · Ø drum: 105 mm · Springs included: Yes · Number of springs: 2 pcs

EUR 28.70

For: DKW

24146

Surflex clutch plates | DKW / Puch MV

Manufacturer: Surflex · Ø outside: 98 mm · Ø outside: 99.4 mm · Ø outside: 104.2 mm · Ø inside: 55.5 mm · Ø inside: 72.7 mm · Ø inside: 74 mm · Area of application: Original · Number of slats: 3 pcs

EUR 58.50

Nos

Thrust washer 12.5/25/1.5 NOS | Puch M50, DSV, VZV

For: Puch

27867

Thrust washer 12.5/25/1.5 NOS | Puch M50, DSV, VZV

Material: Steel · Surface: hardened & ground · Thickness: 1.5 mm · Ø outside: 25 mm · Ø inside: 12.5 mm

EUR 12.00

Intake rubber (1A quality) | Puch MS, VS, MV, DS, X50 (small motorcycle)

For: Puch

29389

Intake rubber (1A quality) | Puch MS, VS, MV, DS, X50 (small motorcycle)

Material: Rubber · Color: black · Manufacturer: Made in Italy

EUR 17.70

Crankshaft full cheeks | Puch MV, VS, MS, DS, Monza, X50 (3 & 4 speed)

For: Puch

29593

Crankshaft full cheeks | Puch MV, VS, MS, DS, Monza, X50 (3 & 4 speed)

Cheek type: Full cheeks · Total length of crankpin on clutch side: 73 mm · Area of application: Tuning · Total length crankpin ignition side: 66 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Number of gears: 3 pcs · Number of gears: 4 pcs

EUR 176.90

Moped fans also bought

Universal

11179

Handlebar with stem 9 cm curved chrome

Material: Steel · Surface: chrome-plated · Ø outside: 22 mm · Color: Chrome · Ø Stem: 22 mm · Stem height: 180 mm · Length handlebar ends: 200 mm · Width: 630 mm · Mounting type: Front boom mounting · Height: 90 mm · Crossbar: No

EUR 82.90

Nos

Universal

17548

Denfeld saddle black NOS

Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Total length: 280 mm · Width: 280 mm · Height: 20 mm · Height: 120 mm · Manufacturer: Denfeld · Number of fixing points: 1 pcs · Ø Saddle tube holder: 22 mm · Spring-loaded: Yes · Lettering: No · Material thickness: 2 mm · Material thickness: 4 mm

EUR 366.20

BING SSE carburetor 12 mm | Puch MV 50, MS 50

For: Puch

19737

BING SSE carburetor 12 mm | Puch MV 50, MS 50

Nominal diameter: 12 mm · Mounting type: Flange · Component group Carburetor: Carburetor complete · Carburetor type: SSE · Choke control: Hand choke · Area of application: Standard · Area of application: Tuning · Ø fuel hose connection: 6 mm · Nozzle size: 50 · Hole spacing inlet: 32 mm

EUR 97.60

For: Puch

25966

Condor Puch sticker Ø 43 mm

Material: Polyvinyl chloride (PVC) · Place of use: Frame (+ tank) · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Diameter: 43 mm

EUR 14.50

For: Puch

29389

Intake rubber (1A quality) | Puch MS, VS, MV, DS, X50 (small motorcycle)

Material: Rubber · Color: black · Manufacturer: Made in Italy

EUR 17.70

Collection only possible with online purchase and appointment.

Air filter | Puch MS, MV, DS, VS, VZ