Black 24 mm PWK racing carburetor (replica) for racing use with your moped, moped or small motorcycle.
This racing carburetor is particularly suitable for large racing bikes from 70 cc in the high-end tuning sector.
The tuning carburetor has a manually operated hand choke.
Note: No connecting flange is included in the scope of delivery.
Alternative carburetors can be found in the accessories section.
| Material | Aluminum |
| Surface | varnished |
| Component group Carburetor | Carburetor complete |
| Carburetor type | RT-PWK, PWK |
| Nominal diameter | 24 mm |
| Mounting type | Flange, Plug connection |
| Ø without reducing sleeve | 24 mm |
| Ø Air filter connection | 50 mm |
| Ø fuel hose connection | 5 mm |
| Total length | 83 mm |
| Color | black |
| Mixed oil connection | Yes |
| Width | 65 mm |
| Vacuum connection | Yes |
| Height | 150 mm |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Camouflaged | No |
| Nozzle size | 115 |
| Size of secondary nozzle | 45 |
| Area of application | Tuning, Racing |
Accessories & related products
Stage6 R/T RT-PWK 28 mm carburetor "Black-Edition"
Manufacturer: Stage6 R/T · Component group Carburetor: Carburetor complete · Surface: varnished · Color: black · Carburetor type: RT-PWK · Nominal diameter: 28 mm · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Flange · Mounting type: Plug connection · Area of application: Tuning
EUR 214.40
Not in stock
Stage6 R/T RT-PWK 24 mm carburetor Stage6 "Black-Edition"
Manufacturer: Stage6 R/T · Component group Carburetor: Carburetor complete · Surface: varnished · Carburetor type: RT-PWK · Color: black · Nominal diameter: 24 mm · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Flange · Mounting type: Plug connection · Area of application: Tuning
EUR 204.60
Not in stock
Polini 26 mm carburetor (hand choke)
Nominal diameter: 26 mm · Manufacturer: Polini · Camouflaged: No · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Width: 65 mm · Height: 155 mm · Carburetor type: Flat slide valve · Total length: 83 mm · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 105 · Size of secondary nozzle: 45
EUR 177.60
21 mm PWK carburetor Racing black
Nominal diameter: 21 mm · Camouflaged: No · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Color: black · Material: Aluminum · Surface: varnished · Width: 65 mm · Height: 150 mm · Carburetor type: PWK · Carburetor type: RT-PWK · Total length: 83 mm · Ø without reducing sleeve: 21 mm · Ø Air filter connection: 50 mm · Mounting type: Flange · Mounting type: Plug connection · Ø fuel hose connection: 5 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 110 · Size of secondary nozzle: 45
EUR 147.00
Moped fans also bought
Nut flywheel M10x1 SW15 serrated
Material: Steel · Surface: galvanized (blue) · Nut type: Flange nut · Width across flats: 15 mm · Thread type: MF10x1 (fine pitch thread) · Height: 10.5 mm · Drive: External hexagon · Ø outside: 19.8 mm · Nominal diameter (thread): 10 mm · Area of application: Standard
EUR 3.55
swiing® revival stud bolts M6 x 106 (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Thread length: 20 mm · Puch OEM number: 360.1.10.034.1
EUR 2.20
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: PVL · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Height: 80 mm · Total length: 170 mm · Width: 150 mm
EUR 183.70
Not in stock
Stage6 nozzle set main nozzles (size 100 - 122) PWK / Keihin
Manufacturer: Stage6 · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 105 · Nozzle size: 108 · Nozzle size: 110 · Nozzle size: 112 · Nozzle size: 115 · Nozzle size: 118 · Nozzle size: 120 · Nozzle size: 122 · Drive: External hexagon · Width across flats: 6 mm
EUR 33.00
Not in stock
Hot 
DMP clutch "Racing" aluminum reinforced | Puch E50
Manufacturer: DMP · Material: Steel · Ø outside: 94 mm · Material addition: Chrome steel (colloquially known as stainless steel) · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Thickness: 22 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 147.00
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
